A multi-point lock engages the door to the frame at four or more points simultaneously with a single handle operation. As you lift the handle, locking bolts extend into strike plates at the top of the frame, the bottom of the frame, and both sides, pulling the door tight against the weatherstrip around the entire perimeter. The result is a door that cannot flex at the corners under wind pressure because it is held from every direction at once.
This hardware is not an add-on or an upgrade. It is part of the impact door assembly that carries the Miami-Dade NOA product approval. The lock, the frame, and the door panel are tested and certified together as a complete system. Haven Home Remodeling Group’s installers adjust every strike plate and engagement point during the Aventura installation to ensure the lock operates smoothly and the seal compresses evenly. This adjustment is verified during the county inspection.